Showing 1 of 4
Part No. | Manufacturer | Description | Qty | RFQ |
---|---|---|---|---|
63320 | Mitee Bite Products Inc | #1000 1"" H x 20"" L x 0.98"" W Wedge Action UNIFORCE Steel | Avl |
|
20417 | Te Co Tooling Components | 13/16"" T-Slot, 5/8""-11 Stud Machinist Clamp Kit | Avl |
|
K025TD | Kant Twist | 2-1/2"" D Deep Jaw Opening Universal Clamps | Avl |
|
26060 | Mitee Bite Products Inc | 1/4""-20 x 0.3"" H x 1.03"" L x 3/4"" W Tool Steel Blunt Edge PITBULL Clamp | Avl |
|
28324 | Mitee Bite Products Inc | 30mm A x 29mm H x 30mm Dia x 29.9mm W Smooth DYNA-FORCE Clamp | Avl |
|
56250 | Mitee Bite Products Inc | 6000lbs Cap Mitee-Bite® Pitbull® Large/Slotted w/ M10 Fixture Clamp | Avl |
|
210208 | Destaco | 3/8-16 x 3.44"" Cone-Tip Bonded Neoprene Spindle Assembly | Avl |
|
20217 | Te Co Tooling Components | 49 Piece 3/4""-10 Stud x 13/16"" Table T-Slot Steel Super Clamp Kit | Avl |
|
0227331 | Fastenal Approved Vendor | 5.5""Turnus 475SeriesReplacementSlidingArm w/ AntiSlipDevice | Avl |
|
KR-AS | Bessey Tools Of North America | 7""L x 1""W K -BODY REVO Plastic Adapters (KR and KRV) | Avl |
|
36914 | Jergens | 3-1/2 x 5/16 - M8 Tapped Strap | Avl |
|
47130 | Mitee Bite Products Inc | DK2-VTI 0.87"" H x 1.14"" L x 1.61"" W Single Wedge OK-VISE Clamp | Avl |
|
30411 | Te Co Tooling Components | 3/4"" Stud x 6"" L 1018 Steel Plain Clamp | Avl |
|
62320 | Mitee Bite Products Inc | #1000 1"" H x 20"" L x 0.98"" W Wedge Action UNIFORCE Channel | Avl |
|
210-UR | Destaco | 210-UR 600lb Capacity Vertical Hold-Down Clamp | Avl |
|
210203 | Destaco | 3/8""-16 x 3.00"" Carbon Steel Hex Head Spindle Assembly | Avl |
|
309-USS | Destaco | 5.19"" x 2.47"" 309-USS 750lb Capacity Compact Hold-Down Clamp | Avl |
|
3237641 | Fastenal Approved Vendor | 299.2 lb Holding Capacity Steel Toggle Clamp | Avl |
|
30507 | Te Co Tooling Components | 5/8"" x 2-1/2"" L Finish Case Hard Steel Serrated End Clamp | Avl |
|
50642 | Mitee Bite Products Inc | 8mm x 14.25mm H x 23.2mm L x 12.7mm W MITEE-BITE Metric T-Slot Kit | Avl |
|
240208 | Destaco | 3/8""-16 x 3.25"" Flat-Tip Bonded Neoprene Spindle Assembly | Avl |
|
32521 | Jergens | 3/8""-16 2300 lb Capacity Leveling Pad | Avl |
|
81L25-14100 | Destaco | 151mm x 40mm Shielded Pneumatic Hold Down Clamp | Avl |
|
202-UL | Destaco | 202-UL 200lb Capacity Vertical Hold-Down Clamp | Avl |
|
30908 | Te Co Tooling Components | 3/8"" Stud x 3"" L 1018 Steel Tapped End Clamp | Avl |
|
26180 | Mitee Bite Products Inc | 0.58"" H x 5.75"" L x 1.25"" W MITEE-BITE Blunt Edge Gripping Rail 2-Pack | Avl |
|
371-SS | Destaco | 11.89"" x 2.63"" Stainless Steel Pull Action Latch Clamp | Avl |
|
341-RSS | Destaco | 8.20"" x 2.12"" Stainless Steel Toggle Lock Plus Pull Action Latch Clamp | Avl |
|
44308 | Te Co Tooling Components | 1""-8 Black Oxide Toggle Clamp | Avl |
|
625L | Bessey Tools Of North America | 5/8"" Stud Size-Long RiteHite L Series Metal Working Hold Down Clamp | Avl |
|
303638-131665 | Fastenal Approved Vendor | 12130 496lb Capacity Vertical Hold-Down Clamp | Avl |
|
0300619 | Fastenal Approved Vendor | 3/8""-16 x 3-1/2"" Flat-Tip Bonded Neoprene Spindle Assembly | Avl |
|
50208 | Mitee Bite Products Inc | M8 A Screw x 19.75mm L x 20.61mm W Metric Fixture Clamp | Avl |
|
CH-302-FM | Clamptek Enterprise Co Ltd | 299 lb Holding Capacity Steel Toggle Clamp | Avl |
|
50426 | Mitee Bite Products Inc | 20.,65mm H x 27.9mm L x 15.9mm W Cam Action Metric T-Slot Clamp | Avl |
|
331-RSS | Destaco | 720 lb Capacity Toggle-Lock Plus Latch Clamp | Avl |
|
341-SS | Destaco | 8.20"" x 2.38"" Stainless Steel Pull Action Latch Clamp | Avl |
|
10642 | Mitee Bite Products Inc | 1/2"" Slot x 0.875"" H x 1.2"" L x .75"" W MITEE-BITE Inch T-Slot Kit | Avl |
|
23240 | Mitee Bite Products Inc | 2"" Hx4.21"" Lx1-1/2"" W w/ Step Multi-Fixture Stop | Avl |
|
227-USS | Destaco | 7.50"" x 1.74"" 227-USS 600lb Capacity Horizontal Hold-Down Clamp | Avl |
|
303642-131665 | Fastenal Approved Vendor | 20752-B 150lb Capacity Horizontal Hold-Down Clamp | Avl |
|
56240 | Mitee Bite Products Inc | 3600lbs Cap Mitee-Bite® Pitbull® Medium/Slotted w/ M6 Fixture Clamp | Avl |
|
3237663 | Fastenal Approved Vendor | 800 lb Holding Capacity Steel Toggle Clamp | Avl |
|
1000 | Destaco | 17.51"" x 4.50"" Heavy Duty Automation Power Clamp | Avl |
|
30408 | Te Co Tooling Components | 5/8"" x 4"" L Finish Case Hardened Steel Plain Clamp | Avl |
|
10422 | Mitee Bite Products Inc | 1/2"" x 0.875"" H x 1.2"" L x 3/4"" W Standard T-Slot Clamp | Avl |
|
60200 | Mitee Bite Products Inc | #2000 2"" Hx4"" Lx2-1/2"" W Machinable UNIFORCE Clamp w/ LockingPlate | Avl |
|
37113 | Jergens | 7 x 5/8 - M16 Padded Strap | Avl |
|
860 | Destaco | 12.44"" x 2.94"" Heavy Duty Automation Power Clamp | Avl |
|
68103 | Te Co Tooling Components | 49 Piece M10-1.5 Stud x 14mm Table T-Slot Steel Super Clamp Kit | Avl |
|
20202 | Te Co Tooling Components | 49 Piece 3/8""-16 Stud x 7/16"" Table T-Slot Steel Super Clamp Kit | Avl |
|
25702 | Jergens | 5/8 x 1/2 Black Oxide Low Carbon Steel Jig Foot | Avl |
|
63120 | Mitee Bite Products Inc | #500 0.5"" H x 20"" L x 0.485"" W Wedge Action UNIFORCE Steel | Avl |
|
303647-131665 | Fastenal Approved Vendor | 20235 750lb Capacity Horizontal Hold-Down Clamp | Avl |
|
30504 | Te Co Tooling Components | 1/2"" x 2-1/2"" L Finish Case Hard Steel Serrated End Clamp | Avl |
|
24100 | Mitee Bite Products Inc | 0.95"" H x 8"" L x 6"" W Blank Vise Pallet | Avl |
|
40EXT | Irwin | 18"" Extension Chain For 20R Locking Chain Clamp | Avl |
|
56220 | Mitee Bite Products Inc | 3600lbs Cap Mitee-Bite® Pitbull® Medium/Compact w/ M6 Fixture Clamp | Avl |
|
40103 | Te Co Tooling Components | 1"" Thick, Height Range: 1-1/8"" to 2-1/2"" Steel Step Block | Avl |
|
810-U | Destaco | 810-U 600 lb Holding Capacity Hold Down Action Air Clamp | Avl |
|
22592 | Mitee Bite Products Inc | 5/8""-11 x 1-5/8"" L x 1-3/16"" W Cam Action Knife Edge Clamp | Avl |
|
30402 | Te Co Tooling Components | 3/8"" x 4"" L Finish Case Hardened Steel Plain Clamp | Avl |
|
0300629 | Fastenal Approved Vendor | M5-0.8 x 30mm Flat-Tip Bonded Spindle Assembly | Avl |
|
507208 | Destaco | 5/16""-18 x 3.00"" Flat-Tip Bonded Neoprene Spindle Assembly | Avl |
|
33360 | Mitee Bite Products Inc | 1.48"" H x 6"" L x 1.98"" W MITEE-BITE Machinable 3-Hole Locating Rail | Avl |
|
3237652 | Fastenal Approved Vendor | 1210 lb Holding Capacity Steel Toggle Clamp | Avl |
|
344-SS | Destaco | 5.77"" x 2.12"" Stainless Steel Pull Action Latch Clamp | Avl |
|
210-U | Destaco | 210-U 600lb Capacity Vertical Hold-Down Clamp | Avl |
|
62220 | Mitee Bite Products Inc | #750 3/4"" H x 20"" L x 0.735"" W Wedge Action UNIFORCE Channel | Avl |
|
30509 | Te Co Tooling Components | 5/8"" x 6"" L Finish Case Hard Steel Serrated End Clamp | Avl |
|
35902 | Jergens | 1-1/2 x 2-1/2 Black Oxide Low Carbon Steel Rest Pad | Avl |
|
35308 | Jergens | 1/2""-13 x 2"" L x 1/2"" W Threaded Rod End | Avl |
|
62010 | Mitee Bite Products Inc | #250 1/4"" H x 20"" L x 0.24"" W Wedge Action UNIFORCE Channel | Avl |
|
30917 | Te Co Tooling Components | 5/8"" Stud x 4-1/2"" L 1018 Steel Tapped End Clamp | Avl |
|
25705 | Jergens | 5/8x7/8x9/32 Black Oxide Low Carbon Steel Jig Foot | Avl |
|
40107 | Te Co Tooling Components | 1-1/2"" Thick, Height Range: 3-1/2"" to 9"" Steel Step Block | Avl |
|
207-UB | Destaco | 207-UB 375lb Capacity Vertical Hold-Down Clamp | Avl |
|
10420 | Mitee Bite Products Inc | 3/8"" x 0.565"" H x 0.89"" L x 0.5"" W Standard T-Slot Clamp | Avl |
|
81L25-10100 | Destaco | 151mm x 40mm Shielded Pneumatic Hold Down Clamp | Avl |
|
25719 | Jergens | 1-5/8x1-1/4 Black Oxide Low Carbon Steel Jig Foot | Avl |
|
KBX20 | Bessey Tools Of North America | K Body® REVO™ KBX20 Clamp Extender for KR3 and KRV Series | Avl |
|
10202 | Mitee Bite Products Inc | 8-32 x 0.46"" L x 0.312"" W Cam Action Standard Fixture Clamp | Avl |
|
50207 | Mitee Bite Products Inc | M8x1.25 A Screw x 21.35mm L x 20.60mm W Stainless Steel Fixture Clamp | Avl |
|
37114 | Jergens | 5 x 3/4 - M19 Padded Strap | Avl |
|
0300631 | Fastenal Approved Vendor | M6-1.0 x 44mm Flat-Tip Bonded Spindle Assembly | Avl |
|
0300199 | Fastenal Approved Vendor | 12140 475lb Capacity Vertical Hold-Down Clamp | Avl |
|
0300617 | Fastenal Approved Vendor | 5/16""-18 x 3"" Flat-Tip Bonded Neoprene Spindle Assembly | Avl |
|
33200 | Mitee Bite Products Inc | 0.48"" H x 3"" L x 0.73"" W MITEE-BITE Machinable 2-Hole Locating Rail | Avl |
|
44432 | Te Co Tooling Components | 1/2""-13 Zinc Plated Leveling Pad | Avl |
|
35317 | Jergens | 1""-8 x 8"" L x 1"" W Threaded Rod End | Avl |
|
35320 | Jergens | 3/8""-16 x 4"" L x 3/8"" W Threaded Rod End | Avl |
|
20212 | Te Co Tooling Components | 20212 49 Piece 1/2""-13 Stud x 5/8"" Table T-Slot Steel Super Clamp Kit | Avl |
|
30506 | Te Co Tooling Components | 1/2"" x 6"" L Finish Case Hard Steel Serrated End Clamp | Avl |
|
3237643 | Fastenal Approved Vendor | 748 lb Capacity ""U"" Hook Pull Action Latch Clamp | Avl |
|
371-R | Destaco | 12.74"" x 2.63"" Toggle Lock Plus Pull Action Latch Clamp | Avl |
|
68204 | Te Co Tooling Components | 38 Piece M12-1.75 Stud x 14mm Table T-Slot T-Nut & Stud Kit | Avl |
|
63520 | Mitee Bite Products Inc | #2000 2"" H x 20"" L x 1.96"" W Wedge Action UNIFORCE Steel | Avl |
|
10504 | Mitee Bite Products Inc | 1/4""-20 Screw x .72"" L x 0.98"" W Machinable Fixture Clamp | Avl |
|
30607 | Clamptek Enterprise Co Ltd | 794 lb Holding Capacity Steel Straight Line Action Clamp | Avl |
|
25717 | Jergens | 1-1/4x1-1/2 Black Oxide Low Carbon Steel Jig Foot | Avl |
|
330-SS | Destaco | 200 lb Capacity ""U"" Hook Pull Action Latch Clamp | Avl |
|
215219 | Destaco | 1/4"" Spindle Dia Flat-Tip Polyurethane Spindle AssemblyCap | Avl |
|
2002-U | Destaco | 3.29"" x 1.52"" 2000 Series 600lb Capacity Vertical Handle Hold Down Clamp | Avl |
|
20204 | Te Co Tooling Components | 49 Piece 3/8""-16 Stud x 9/16"" Table T-Slot Steel Super Clamp Kit | Avl |
|
3237645 | Fastenal Approved Vendor | 990 lb Capacity ""U"" Hook Pull Action Latch Clamp | Avl |
|
50652 | Mitee Bite Products Inc | 18mm x 38.13mm H x 34.7mm L x 28.6mm W MITEE-BITE Metric T-Slot Kit | Avl |
|
30412 | Te Co Tooling Components | 3/4"" Stud x 8"" L 1018 Steel Plain Clamp | Avl |
|
33340 | Mitee Bite Products Inc | 0.98"" H x 10"" L x 1.23"" W MITEE-BITE Machinable 4-Hole Locating Rail | Avl |
|
20213 | Te Co Tooling Components | 20213 49 Piece 1/2""-13 Stud x 11/16"" Table T-Slot Steel Super Clamp Kit | Avl |
|
30501 | Te Co Tooling Components | 3/8"" x 2-1/2"" L Finish Case Hard Steel Serrated End Clamp | Avl |
|
344 | Destaco | 5.78"" x 2.12"" Pull Action Latch Clamp | Avl |
|
303636-131665 | Fastenal Approved Vendor | 201-A 60lb Capacity Capacity Horizontal Hold-Down Clamp | Avl |
|
J263RC | Proto | Replacement Chain for Proto® J263XL | Avl |
|
235-USS | Destaco | 10.87"" x 2.25"" 235-USS 850lb Capacity Horizontal Hold-Down Clamp | Avl |
|
26000 | Mitee Bite Products Inc | 4-40 x 0.15"" H x 0.515"" L x 3/8"" W Tool Steel Knife Edge PITBULL Clamp | Avl |
|
20416 | Te Co Tooling Components | 3/4"" T-Slot, 5/8""-11 Stud Machinist Clamp Kit | Avl |
|
26065 | Mitee Bite Products Inc | 1/4""-20 x 0.3"" H x 1.03"" L x 3/4"" W Brass Blunt Edge PITBULL Clamp | Avl |
|
50204 | Mitee Bite Products Inc | M4 A Screw x 12.4mm L x 7.93mm W Metric Fixture Clamp | Avl |
|
68208 | Te Co Tooling Components | 38 Piece M16-2.0 Stud x 20mm Table T-Slot T-Nut & Stud Kit | Avl |
|
K010T | Kant Twist | 1"" Standard T-Handle Universal Clamps | Avl |
|
KT5-1CP | Bessey Tools Of North America | Single Spindle Clamp for use with TG Series Edge Clamp | Avl |
|
0227330 | Fastenal Approved Vendor | 4.75""Turnus 475SeriesReplacementSlidingArm w/ AntiSlipDevice | Avl |
|
60500 | Mitee Bite Products Inc | #500 1/2"" H x 5/8"" L x 0.485"" W Wedge Action UNIFORCE Clamp | Avl |
|
303646-131665 | Fastenal Approved Vendor | 22502B 500lb Capacity Horizontal Hold-Down Clamp | Avl |
|
81L20-14100 | Destaco | 151mm x 40mm Shielded Pneumatic Hold Down Clamp | Avl |
|
30410 | Te Co Tooling Components | 3/4"" Stud x 4"" L 1018 Steel Plain Clamp | Avl |
|
36916 | Jergens | 4-1/2 x 3/8 - M10 Tapped Strap | Avl |
|
609 | Destaco | 300 lb Holding Capacity Straight Line Action Clamp | Avl |
|
105203 | Destaco | #8-32 x 0.84"" Nylon Hex Head Spindle Assembly | Avl |
|
624 | Destaco | 700 lb Holding Capacity Straight Line Action Clamp | Avl |
|
10208 | Mitee Bite Products Inc | 1/2""-13 x 1.275"" L x 1"" W Cam Action Standard Fixture Clamp | Avl |
|
650 | Destaco | 16000 lb Holding Capacity Straight Line Action Clamp | Avl |
|
68202 | Te Co Tooling Components | 38 Piece M10-1.5 Stud x 12mm Table T-Slot T-Nut & Stud Kit | Avl |
|
861 | Destaco | 12.44"" x 2.94"" Heavy Duty Automation Power Clamp | Avl |
|
0303930 | Fastenal Approved Vendor | 1/2"" Steel Bolt Retainer | Avl |
|
33380 | Mitee Bite Products Inc | 1.48"" H x 10"" L x 1.98"" W MITEE-BITE Machinable 4-Hole Locating Rail | Avl |
|
864L | Destaco | 13.58"" x 3.64"" Heavy Duty Enclosed Automation Power Clamp | Avl |
|
68115 | Te Co Tooling Components | 49 Piece M20-2.5 Stud x 22mm Table T-Slot Steel Super Clamp Kit | Avl |
|
63010 | Mitee Bite Products Inc | #250 0.25"" H x 20"" L x 0.24"" W Wedge Action UNIFORCE Steel | Avl |
|
20404 | Te Co Tooling Components | 5/8"" T-Slot, 1/2""-13 larger T-Nut Machinist Clamp Kit | Avl |
|
225208-M | Destaco | M8-1.25 x 53mm Flat-Tip Bonded Neoprene Spindle Assembly | Avl |
|
205-SL | Destaco | 205-SL 60lb Capacity Horizontal Hold-Down Clamp | Avl |
|
303652-131665 | Fastenal Approved Vendor | 2000 lb Capacity ""U"" Hook Pull Action Latch Clamp | Avl |
|
60050 | Mitee Bite Products Inc | #500 1/2"" Hx1-1/4"" Lx0.62"" W Machinable UNIFORCE Clamp w/ Locking Plate | Avl |
|
864D | Destaco | 13.58"" x 3.64"" Heavy Duty Enclosed Automation Power Clamp | Avl |
|
303643-131655 | Fastenal Approved Vendor | 201-B 200lb Capacity Horizontal Hold-Down Clamp | Avl |
|
33892 | Te Co Tooling Components | 4-11/16"" Nuzzler Edge Clamps Low Grip Nose Style | Avl |
|
50216 | Mitee Bite Products Inc | M16 A Screw x 41.20mm L x 30.13mm W Metric Fixture Clamp | Avl |
|
954050 | Destaco | 50mm x 20mm Alum Pneumatic Swing Clamp Arm | Avl |
|
0303923 | Fastenal Approved Vendor | 5/16"" Polyurethane Spindle Head Flat-Tip Cap | Avl |
|
33140 | Mitee Bite Products Inc | 0.35"" H x 4"" L x 0.48"" W MITEE-BITE Machinable 3-Hole Locating Rail | Avl |
|
864R | Destaco | 13.58"" x 3.64"" Heavy Duty Enclosed Automation Power Clamp | Avl |
|
33893 | Te Co Tooling Components | 4-11/16"" Nuzzler Edge Clamps Standard Grip Nose Style | Avl |
|
30902 | Te Co Tooling Components | 1/4"" Stud x 2"" L 1018 Steel Tapped End Clamp | Avl |
|
33812 | Te Co Tooling Components | 7-1/8"" Nuzzler Edge Clamps Low Grip Nose Style | Avl |
|
890 | Destaco | 13.37"" x 3.56"" Heavy Duty Automation Power Clamp | Avl |
|
207-S | Destaco | 207-S 500lb Capacity Vertical Hold-Down Clamp | Avl |
|
50428 | Mitee Bite Products Inc | 28.55mm H x 30.5mm L x 22.4mm W Cam Action Metric T-Slot Clamp | Avl |
|
30407 | Te Co Tooling Components | 5/8"" x 2-1/2"" L Finish Case Hardened Steel Plain Clamp | Avl |
|
32523 | Jergens | 5/8""-11 6600 lb Capacity Leveling Pad | Avl |
|
20218 | Te Co Tooling Components | 49 Piece 3/4""-10 Stud x 7/8"" Table T-Slot Steel Super Clamp Kit | Avl |
|
50648 | Mitee Bite Products Inc | 14mm x 28.55mm H x 30.5mm L x 22.4mm W MITEE-BITE Metric T-Slot Kit | Avl |
|
K045TD | Kant Twist | 4-1/2"" D Deep Jaw Opening Universal Clamps | Avl |
|
247-U | Destaco | 247-U 1000lb Capacity Vertical Hold-Down Clamp | Avl |
|
225-U | Destaco | 225-U 500lb Capacity Horizontal Hold-Down Clamp | Avl |
|
3237651 | Fastenal Approved Vendor | 499 lb Holding Capacity Steel Toggle Clamp | Avl |
|
341-R | Destaco | 2000 lb Capacity Toggle-Lock Plus Latch Clamp | Avl |
|
26070 | Mitee Bite Products Inc | 3/8""-16 x 0.4"" H x 1.45"" L x 1"" W Tool Steel Knife Edge PITBULL Clamp | Avl |
|
60075 | Mitee Bite Products Inc | #750 3/4"" Hx1-1/2"" Lx0.94"" W W Machinable UNIFORCE Clamp w/ Locking Plate | Avl |
|
374 | Destaco | 4000 lb Capacity ""U"" Hook Pull Action Latch Clamp | Avl |
|
954053 | Destaco | 80mm x 20mm Alum Pneumatic Swing Clamp Arm | Avl |
|
JMGHXL | Proto | 5-5/32""OAL Black Steel Proto® MGHXL Locking Grip Holder for 10"" Tools | Avl |
|
9626653 | C H Hanson Palmgren | 630 x 630mm Steel Tombstone | Avl |
|
50212 | Mitee Bite Products Inc | M12 A Screw x 32.32mm L x 25.38mm W Metric Fixture Clamp | Avl |
|
21001 | Te Co Tooling Components | 5/16-3/8 Stud 1"" Steel Step Block/Clamp Kit (6Block/6Clamp) | Avl |
|
STC-HH70 | Bessey Tools Of North America | 2-3/4"" Opening Straight Handle 700lb Capacity Auto-Adjust Horizontal Toggle Clamp | Avl |
|
50654 | Mitee Bite Products Inc | 20mm x 44.5mm H x 39.2mm L x 31.8mm W MITEE-BITE Metric T-Slot Kit | Avl |
|
60055 | Mitee Bite Products Inc | #500 1/2"" H x 1.125"" L x 0.62"" W Machinable UNIFORCE Clamp w/o Locking Plate | Avl |
|
303657-131665 | Fastenal Approved Vendor | 200 lb Holding Capacity Steel Straight Line Action Clamp | Avl |
|
26015 | Mitee Bite Products Inc | 4-40 x 0.15"" H x 0.515"" L x 3/8"" W Brass BluntEdge PITBULL Clamp | Avl |
|
207-U | Destaco | 207-U 375lb Capacity Vertical Hold-Down Clamp | Avl |
|
237-U | Destaco | 237-U 750lb Capacity Horizontal Hold-Down Clamp | Avl |
|
624-SS | Destaco | 700 lb Holding Capacity Stainless Steel Straight Line Action Clamp | Avl |
|
240208-M | Destaco | M10-1.5 x 79mm Flat-Tip Bonded Neoprene Spindle Assembly | Avl |
|
0300639 | Fastenal Approved Vendor | 5/16-18 x 3"" Cone-Tip Bonded Neoprene Spindle Assembly | Avl |
|
8071 | Destaco | 10.90"" x 2.81"" Enclosed Pneumatic Hold Down Clamp | Avl |
|
68102 | Te Co Tooling Components | 49 Piece M10-1.5 Stud x 12mm Table T-Slot Steel Super Clamp Kit | Avl |
|
267-U | Destaco | 267-U 1200lb Capacity Vertical Hold-Down Clamp | Avl |
|
205-U | Destaco | 205-U 60lb Capacity Horizontal Hold-Down Clamp | Avl |
|
235208 | Destaco | 3/8""-16 x 5.75"" Flat-Tip Bonded Neoprene Spindle Assembly | Avl |
|
20207 | Te Co Tooling Components | 20207 49 Piece 1/2""-13 Stud x 11/16"" Table T-Slot Steel Super Clamp Kit | Avl |
|
30510 | Te Co Tooling Components | 3/4"" Stud x 4"" L 1018 Steel Serrated End Clamp | Avl |
|
47185 | Mitee Bite Products Inc | BK2-VT-B 0.59"" H x 2.8"" L x 1.26"" W Special Model OK-VISE Clamp | Avl |
|
68005 | Te Co Tooling Components | 52 Piece M12-1.75 Stud x 17mm Table T-Slot Machinist Clamp Kit | Avl |
|
8JG-215-1 | Destaco | 67mm x 15mm Pneumatic Swing Clamp Arm | Avl |
|
30502 | Te Co Tooling Components | 3/8"" x 4"" L Finish Case Hard Steel Serrated End Clamp | Avl |
|
0300628 | Fastenal Approved Vendor | M4-0.7 x 25mm Flat-Tip Bonded Spindle Assembly | Avl |
|
35304 | Jergens | 3/8""-16 x 2"" L x 3/8"" W Threaded Rod End | Avl |
|
10510 | Mitee Bite Products Inc | 5/8""-11 Screw x 1-5/8"" L x 1.73""W Machinable Fixture Clamp | Avl |
|
381 | Destaco | 1000 lb Capacity ""U"" Hook Pull Action Latch Clamp | Avl |
|
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote